| |
1. INJECTION MOULDED INDUSTRIAL PLASTIC PRODUCTS
|
| Moduled From Engineering Polymers |
 Top |
|
2. PRODUCTS MOULDED FROM PEEK HIGH PERFORMANCE MATERIAL
| |
 |
|
 |
|
| |
|
|
| |
PEEK™is Polyaryletherketoneor known as Polyetheretherketone.
• Manufacturing of PEEK products by Injection Moulding technique.
• Performing post moulding processes to obtain ultimate inherit properties of the material.
• Any part can be developed as per customer’s drawing , specifications or sample.
• All grades of PEEK -Un-reinforced, Glass reinforced, Carbon fiber-reinforced , Lubricated grades with Graphite and PTFE reinforced are moulded.
• Standard Stock shapes-Rods, Tubes & sheets are available. |
|
PRODUCTSImportant Characteristics of PEEK™
• High Temperature Performance + 260°C & up to 300°C.
• Very high mechanical strength.
• Excellent Chemical Resistance.
• High Wear Resistance.
• Very high Radiation Resistance.
• Low Flammability (UL V-O rating down to 1.45 mm) ,
• Low Smoke and Toxic Gas Emission in fire situations,.
• Very good Hydrolysis Resistance.
• Very good Electrical Properties. |
|
| |
|
|
| |
Application |
|
| |
Bearing bushes, Piston Rings, Valve seats, Gears, Seals, Aviation Cog wheels, Chemical Pump vanes & fluid dispensing parts, Medical & Surgical devices, Compressor valve plates, Air Nozzles, and many Metal parts replacements. |
|
| |
Top |
|
|
|
3. PRODUCTS MOULDED FROM POLYURETHENE [TPU]
4. TEXTILE INDUSTRIES PRODUCTS
 |
 |
| |
• Endeavour SOFT BLOW HAMMERS are the most advanced type of Hammer fabricated with Polyurethane heads, designed and engineered for its silent & maintenance free long lasting service to get optimum Impact strength at exertion of minimum human energy.
• In addition to the special design of the hammer body,using lighter weight seamless tubular steel duly powder coated & fitted with high quality shock absorbing ergonomically design Rubber grip at the handle.The pipe and body is firmly dowelled rather then welded , for more safety.The special property of PU used at the heads that attribute to its sturdiness & wear resistance when compared to conventional mallets available in the market, are
1.High elasticity, irrespective of hardness.
2.Flexibility at wide range of temperature ranging from -40° C to + 110° C.
3.Good resistance to all adverse weather conditions, even at high energy radiation.
4.Good resistance to Oil, Grease & many more chemicals & solvents as also to Rotting.
5.Extreme high wear resistance & impact strength.
6.Available in three sizes- 35mm Ø ,50mm Ø, & 75mm Ø
The hammer heads are distincted by two colours for different hardness suitable for various applications. Yellow for Soft & Red for Hard Shore hardness .
The hammers are available with 35mm Ø ,50mm Ø & 75mm Ø heads
Endeavour’ SOFT BLOW HAMMERS are extensively used in – Steel & Aluminum sheet metal works, Automobile fabrication, Precision Tools, Jigs, Fixtures, Moulds & Dies assembly work, Electrical Motor rewinding, Industrial /Electrical /Home appliances assembly and maintenance work, Fixing of the floor tiles & other endless application left to your imagination……….
PLEASE DO NOT USE THIS HAMMER ON SHARP EDGES, NAILS OR ON VERY HOT SURFACES.
|
| |
| Top |
|
6. PLASTIC FASTNERS
| |
 |
The Advantages of Plastic Fasteners
• Most of our fasteners are made of Polyamide 6.6 , Poly Acetal, PP (Polypropylene) or any specific material required by customer.
• The working temperature range of Plastic fastener is from -30 °C to +130 °C and it has a peak utilization temperature of +155 °C allowing many applications throughout industry.
|
|
| |
|
|
| |
• Fasteners from plastics are extremely light, do not rust, clean and insulating. Therefore, they can be used in the foodstuffs and medical industries |
|
| |
• Their excellent resistance to traction and combustion (UL 94), their elasticity, and their excellent electrical and chemical characteristics mean that Plastic Fasteners are being increasingly widely used and can even be said to have become indispensable.
|
|
| |
• Plastic Fasteners resists most diluted acids. It also has excellent resistance to petroleum, benzene, acetone, white spirit, trichloroethylene and oil. |
|
| |
• Widely used by the Chemical, Electronic and Electrical industries. |
|
| |
Please note that, above above mentioned sizes are max length supplied by us and user should cut to their required length. Special length [More then specified] will be supplied if qty. requirement is higher then 1000 nos/lot.
|
|
| |
| |
| Sr.
No. |
Thread Size "M"
|
Length
"L" |
Pitch |
Hex Head"k" |
Hex Head"s"
|
01 |
2.0 |
20.00 |
0.40 |
1.15 |
3.20 |
02 |
2.5 |
20.00 |
0.45 |
1.30 |
4.00 |
03 |
3.0 |
20.00 |
0.50 |
2.00 |
5.50 |
04 |
4.0 |
20.00 |
0.70 |
2.80 |
7.00 |
05 |
5.0 |
20.00 |
0.80 |
3.50 |
8.00 |
06 |
*6.0 |
20.00 |
1.00 |
4.00 |
10.00 |
07 |
*8.0 |
45.00 |
1.25 |
5.30 |
13.00 |
08 |
*10.0 |
30.00 |
1.50 |
6.40 |
17.00 |
09 |
12.0 |
50.00 |
1.75 |
7.50 |
19.00 |
10 |
16.0 |
50.00 |
2.00 |
10.00 |
24.00 |
11 |
18.0 |
50.00 |
2.50 |
11.50 |
27.00 |
12 |
20.0 |
50.00 |
2.50 |
12.00 |
29.00 |
|
|
| |
Nom. Screw Length |
Tolerence Of Screw Length mm. |
|
| |
16 to 55 mm |
0.5
±
|
|
| |
Over 50 mm |
1.0 ± |
|
| |
| Top |
|
| |
7. CD RACK SYSTEM :
• Modular design CD Rack System with snap fit modules.
|
| • Vertical, Horizontal or Sideway placement. |
• 25 modules advisable in vertical and endless modules in other positions.
|
| • Manufactured in splendid colours from ABS plastic material .
|
| • Add or remove modules by little expanding from any one side to avoid breakage of snap pins. |
| • Use the Endeavour CD Rack System to transform any cabinet or shelf in to customized CD storage.
|
| Top |
|
|
|
